A Modified Sliding Mode Control for Accurate Position Control of a Hydraulic Cylinder

Document Type : Original Article

Authors

1 Mechanical Power Engineering, Faculty of engineering,Port Said University, Port Said, Egypt

2 Mechanical Power Engineering, Faculty of Engineering, Ain Shams University, Cairo, Egypt

Abstract

The Electrohydraulic Servo Systems (EHSS) are used extensively in industry such as flight, ships engineering, machines of injection molding, robotics and steel and aluminum factory's equipment. It has the advantage of high power to weight ratio, linear movement and fast response. In order to overcome the problem of nonlinearity of the controlled system, a sliding mode controller, ESMC, is proposed in such a way that the error signals modifies the ordinary switching mode control action. Pulse width modulation, PWM, technique is used to convert the control action into a digital signal capable of driving the solenoid of an electrohydraulic servo valve to control the oil flow entering the hydraulic cylinder so that its position could be controlled. A dynamic model of an electrohydraulic control system is simulated using MATLAB/Simulink software where the control parameters are optimized for experimental testing of PID and sliding mode controllers. The two controllers are then fine-tuned experimentally, and their performance is compared under square and sinusoidal reference inputs. The experiments showed that the proposed ESMC gives less steady state error, less overshoot and less settling time as compared to both PID and the ordinary switching sliding mode controllers.

Keywords

Port-Said Engineering Research Journal
Volume 24, Issue 2
September 2020
Pages 122-128

Files

Share

How to cite

Statistics